DustHog VP-1500 Portable Cartridge Collector, 1,500 CFM

Description

Roll it to the job. Self cleaning cartridge filtration on casters, for the shop where the work is never twice in the same place.

You are buying this for portable source capture on welding, grinding and cutting that moves.

We are a Parker distributor and we sell this line every week. That means you get the right part number the first time rather than a catalog page and a phone number.

Choose your capture

This unit takes Parker’s XA source capture swing arm, 8 in. diameter in 7, 10 or 12 ft, or an 8 in. inlet collar in place of the arm if you are running your own hose. Pick yours from the Arm dropdown above and it ships on the same truck as the machine.

Configure it

Pick your build from the Configuration dropdown above. Every entry is a real Parker part number from the current July 2026 price file, horsepower, voltage and filter options already resolved, with the part number shown in brackets so you can check it against a drawing or a previous order. 12 configurations available on this model.

What you get

• A genuine Parker DustHog unit, built to order at the factory
• Ships LTL freight. We quote the actual freight and confirm it with you before anything leaves the factory, so there is no surprise on the invoice
• The part number confirmed against Parker’s current price file before we place it
• Replacement filters and spare parts listed on this site so you are not hunting them in two years

Who this is not for

• Combustible dust. This unit is not rated for combustible dust service. If your dust is combustible, stop and call us before you buy anything.
• A problem a hood can reach. If the operator is standing in the plume and a hood or an arm would reach the work, source capture beats this every time.
• A documented overexposure. If you have air sampling showing people over a limit, that needs a designed capture system, not a unit off a web page.

Priced at Parker list.

Not sure which configuration fits your machine or your room? Get a free assessment and we will spec it with you before you spend a dollar.

Parker part numbers for this unit

Every configuration of this unit lives on this page. If you came in with a part number from a quote, a drawing, or an old nameplate, match it against the list below, then pick that configuration above.

VP-1500, VP-1500-C33UFC, VP-1500-C33UFH, VP-1500-C33UFN, VP-1500-C33UNC, VP-1500-C33UNH, VP-1500-C33UNN, VP-1500-C34UFC, VP-1500-C34UFH, VP-1500-C34UFN, VP-1500-C34UNC, VP-1500-C34UNH, VP-1500-C34UNN, VP-1500C33UFC, VP-1500C33UFH, VP-1500C33UFN, VP-1500C33UNC, VP-1500C33UNH, VP-1500C33UNN, VP-1500C34UFC, VP-1500C34UFH, VP-1500C34UFN, VP-1500C34UNC, VP-1500C34UNH, VP-1500C34UNN

Parts that fit this collector

Matched to the DustHog V-Series by Parker. Click any part to go straight to it.

Filters and cells

• Carbon After Filter (33-1219)
• HEPA Filter (99.97%) (33-10081-0001)
• HEPA Filter (99.97%) (33-10082-0001)
• ProTura® Nanofiber (33-10097)
• ProTura® Nanofiber (33-10098)
• ProTura® Nanofiber Fire Retardant (FR) (33-10097-1)
• ProTura® Nanofiber Fire Retardant (FR) (33-10098-1)
• ProTura® Nanofiber Fire Retardant (FR) Wide Pleat (33-10097-15)
• ProTura® Nanofiber Fire Retardant (FR) Wide Pleat (33-10098-15)
• ProTura® Nanofiber Wide Pleat (33-10097-5)
• ProTura® Nanofiber Wide Pleat (33-10098-5)

Electrical

• Pulse Control Board, V-series (20-3232)
• Valve, Diaphragm, 1 in. Comp., DP25 (07-10002-0002)

Mounting and hardware

• Caster Rigid, 5 in. Dia. (17-0026)
• Caster-Swivel, 5 in. DIA.W/Lock (17-0027)

Hoses and ducting

• Steel Tube V-series (39-0268)

Ducting and connections

Match to the inlet collar size you configured on this unit.

6 in.

• 6 in. Clamps, EA (15-0004)
• 6 in. Flexhose, Per Foot (15-0107)
• 6 in. Inlet Collar, Flange (3261-0600)
• 6 in. Inlet Collar, Slip (03-10812)
• Elbow Brkt, Left, 6 in. SA, Insid (10-12688-1M)
• Elbow Brkt, Left, 6 in. SA, Outsi (10-12689-2M)
• Elbow Brkt, Right, 6 in. SA, Insi (10-12689-1M)
• Elbow Brkt, Right, 6 in. SA, Outs (10-12688-2M)

8 in.

• 8 in. Clamps, EA (15-0005)
• 8 in. Flexhose, Per Foot (15-0071)
• 8 in. Inlet Collar, Flange (3261-0800)
• 8 in. Inlet Collar, Slip (03-10813)
• Cap 8 in. Uncrimped (15-0024)
• Elbow Brkt, Left, 8 in. SA, Insid (10-12688-3M)
• Elbow Brkt, Left, 8 in. SA, Outsi (10-12689-4M)
• Elbow Brkt, Right, 8 in. SA, Insi (10-12689-3M)
• Elbow Brkt, Right, 8 in. SA, Outs (10-12688-4M)
• Flex DUCT-8 in. (15-0049)

Swing arms for this unit

Parker lists 7, 10 and 12 ft. industrial swing arms as options on the VP.

• XA Swing Arm, 6 in. Dia, 10′ Long, Portable (01-10161)
• XA Swing Arm, 6 in. Dia, 10′ Long, Wall (requires Kit 03-10615-U) (01-10164)
• XA Swing Arm, 6 in. Dia, 12′ Long, Portable (01-10162)
• XA Swing Arm, 6 in. Dia, 12′ Long, Wall (requires Kit 03-10615-U) (01-10165)
• XA Swing Arm, 6 in. Dia, 7′ Long, Portable (01-10160)
• XA Swing Arm, 6 in. Dia, 7′ Long, Wall (requires Kit 03-10615-U) (01-10163)
• XA Swing Arm, 8 in. Dia, 10′ Long, Portable (01-10148)
• XA Swing Arm, 8 in. Dia, 10′ Long, Wall (requires Kit 03-10611-U) (01-10151)
• XA Swing Arm, 8 in. Dia, 12′ Long, Portable (01-10149)
• XA Swing Arm, 8 in. Dia, 12′ Long, Wall (requires Kit 03-10611-U) (01-10152)
• XA Swing Arm, 8 in. Dia, 7′ Long, Portable (01-10147)
• XA Swing Arm, 8 in. Dia, 7′ Long, Wall (requires Kit 03-10611-U) (01-10150)