Getting Started Is Simple.
Whatever’s driving you to look — a failed inspection, aging equipment, or a new line going in — you want a straight path from problem to clean air. No pressure, no jargon, just honest answers from people who’ve sized and installed these systems for decades.
You’re in good company. We’ve helped hundreds of Southwest facilities walk this same path — from small welding shops adding their first fume extractor to large plants installing 100,000+ CFM central baghouse systems. Every project follows the same straightforward process.
And you won’t get sold a box and waved off. We engineer the system for your specific dust type, volume, and layout, then install, commission, and support it long-term. That’s the only reason we can stand behind the guarantee.
Every system we engineer is backed by our pass-or-free compliance guarantee. If it doesn’t pass OSHA or NFPA inspection because of how we designed or installed it, we fix it at no cost to you. Here’s who installs your system. For a full breakdown of what systems run, see the 2026 cost guide.
Four Steps From Call to Clean Air
You reach out
Book online or call 602-456-9661. Tell us what you make, your current setup, and what’s prompting the look.
Free site assessment
We come to you — test air quality, measure capture velocities, identify dust sources, and find the compliance gaps. At no cost.
Clear recommendation
Equipment specs, compliance documentation, and financing options — laid out for your facility, with every question answered before anything moves forward.
Install & support
We handle installation, commissioning, testing, and training, so your team runs it confidently from day one.
The Standards You Need to Meet
OSHA Standards
→ Permissible Exposure Limits (PELs) for airborne contaminants
→ Respiratory protection (29 CFR 1910.134)
→ General ventilation (29 CFR 1910.94)
→ Silica standard (29 CFR 1910.1053)
→ Hexavalent chromium & welding fume rules
→ Housekeeping & combustible dust accumulation
NFPA Combustible Dust Standards
→ NFPA 660 — the consolidated combustible dust standard (effective Jan 1, 2026)
→ Dust hazard analysis (DHA) requirements
→ NFPA 68 — deflagration venting
→ NFPA 69 — explosion prevention systems
→ KSt-based explosion protection sizing
→ Isolation valves & suppression systems
What Proper Protection Actually Buys You
Most industrial dust is combustible — and most collectors get sold without anyone checking whether yours is. A box-seller ships the unit, skips the explosion protection, and leaves you holding the liability. When it’s sized right to your dust’s KSt value, here’s what it gives you instead:
Removes ignition sources
Explosion-rated motors and switches keep sparks out of the collector and ductwork, where dust concentrations are highest.
Documentation that defends you
A DHA and sized protection give you the paper trail that holds up when an inspector or insurer asks how you handle combustible dust.
Contained, not catastrophic
Deflagration venting and suppression direct an event safely and keep it from spreading — the difference between an incident and a loss.
A system that keeps running
Built right the first time, it stays compliant and online — no retrofits, no surprise stoppages to bring it up to standard later.
However You Come at This, We Speak Your Language
Plant & operations managers
Systems designed around your production schedule, with minimal downtime during installation — we work weekends and off-shifts when that’s what it takes to keep your line moving.
Safety & EHS directors
Full compliance documentation for audits — air quality reports, DHA testing, explosion protection calculations, and NFPA 660 checklists — so what’s on your floor matches what’s on paper.
Facilities engineers & architects
Integration with existing electrical, ductwork, and structure, plus the documentation your AHJ needs for permit approval. Architect collaboration guide →
Purchasing & finance teams
Transparent pricing with no change orders, plus $0-down financing up to 60 months and clear ROI from uptime, lower insurance exposure, and avoided rework.
What You Can Bring to Us
Baghouse dust collectors
Heavy-duty fabric filtration for high-volume, high-temperature work. 1,000 to 100,000+ CFM with modular expansion.
Cartridge dust collectors
Compact high-efficiency filtration for fine dust and fume. 99.97% at 0.3 microns — welding, laser cutting, pharmaceutical.
Fume extraction
Source capture arms, downdraft tables, ambient air cleaners, and welding booths for point-of-source capture.
Explosion protection
Deflagration venting, chemical suppression, isolation valves, and flameless venting — sized to your dust’s KSt value per NFPA 68.
Filters & replacement parts
Replacements for all major manufacturers — baghouse bags, cartridges, HEPA, and pleated.
Maintenance & service
Filter changes, pulse-cleaning checks, annual performance testing, and compliance doc updates. Preventive programs keep systems efficient.
Industries We Serve
Start With a Free Assessment
Book your free site assessment and you’ll get straight answers from compliance experts who’ve done this for decades — no sales pressure, just a clear read on where you stand and what it’ll take.
Serving facilities across Arizona, California, Nevada, New Mexico, and Utah.