SmogHog SGN High Volume Electrostatic Collector SGN-121

Description

When one machine is not the problem and the whole room is, the SGN is the high volume end of the electrostatic line. Same washable cell principle, far more air.

You are buying this for high volume oil mist and smoke across a full cell or department.

We are a Parker distributor and we sell this line every week. That means you get the right part number the first time rather than a catalog page and a phone number.

Sized with your order

Your pulley drive set, inlet collar, and drain loops or bottles are matched to your airflow and static pressure rather than fixed into the part number. Give us your airflow and static pressure when you order and we set them with Parker and ship them with the machine.

Configure it

Pick your build from the Configuration dropdown above. Every entry is a real Parker part number from the current July 2026 price file, horsepower, voltage and filter options already resolved, with the part number shown in brackets so you can check it against a drawing or a previous order. 13 configurations available on this model.

What you get

• A genuine Parker SmogHog unit, built to order at the factory
• Ships LTL freight. We quote the actual freight and confirm it with you before anything leaves the factory, so there is no surprise on the invoice
• The part number confirmed against Parker’s current price file before we place it
• Replacement filters and spare parts listed on this site so you are not hunting them in two years

Who this is not for

• Combustible dust. This unit is not rated for combustible dust service. If your dust is combustible, stop and call us before you buy anything.
• A problem a hood can reach. If the operator is standing in the plume and a hood or an arm would reach the work, source capture beats this every time.
• A documented overexposure. If you have air sampling showing people over a limit, that needs a designed capture system, not a unit off a web page.

Priced at Parker list.

Not sure which configuration fits your machine or your room? Get a free assessment and we will spec it with you before you spend a dollar.

Parker part numbers for this unit

Every configuration of this unit lives on this page. If you came in with a part number from a quote, a drawing, or an old nameplate, match it against the list below, then pick that configuration above.

SGN121, SGN121-FB24L, SGN121-FB34L, SGN121-NB22L, SGN121-NB23L, SGN121-NB24L, SGN121-NB24R, SGN121-NB33L, SGN121-NB33R, SGN121-NB34L, SGN121-NB35R, SGN121-PB24L, SGN121-PB24R, SGN121-PB34L

Parts that fit this collector

Matched to the SmogHog SGN by Parker. Click any part to go straight to it.

Filters and cells

• Filter, Coalescing, Oil Mist, SG (33-10062-0001)
• Filter-mesh STAIN.STL. (SG) (33-0158)
• Cell Bottom Endplate Assembly (02-3319)
• Cell Top Endplate Assembly (02-3318)
• Insulator Assembly, Ionizer Feed Through (02-0749-SP)
• Insulator, Cell (Triangular), B (37-0061)
• Plate-Cell, Narrow (hot) (10-0157)
• Plate-Cell, Wide (ground) (10-0158)
• Rail-Ionizer, 10 Wire SG Bottom (18-0670)
• Rail-Ionizer, 10 Wire SG Top (18-0674)
• Unicell SG (wide Spaced Cell) (02-10421-0001-S)

Drains

• Drain Loop Plastic Bottle, SHN/SGN (02-2905)
• Drain Loop Trap, SHN/SGN (03-10390-0001)

Motors and drives

• Blower Wheel, SG-4 Replacement (32-0163)
• Shaft 1-3/16 in. Replace For SG-4 (32-0162)

Mounting and hardware

• Retro-fit Kit (SG-4 Grille) (03-1092)
• Screw-Mch, TS, Slt, 1/4-20X1/4,SS (30-0387)

Other parts

• Adaptor Weldment (SG) (18-0701)
• Bottom Pan (sg-e) (10-2427)
• End Plate (SG) (10-2256)
• Insulator-Conv, 7/8D X 2 1/2L (37-0028)
• Nut-Wld, 1/4-20,SST (30-0452)