You’re changing filters across rooftop units, air handlers and a building full of returns. You need the right grade in the right size, by the case, without chasing three suppliers to fill one PM route. Watch the one minute video, then pick your grade.
Which filter does your system need?
- Panel: catches lint, hair and construction debris at the lowest cost per change. Good for construction and remodel jobs and make up air units. Shop panel filters
- MERV 8: Parker rates its Xtreme Plus MERV 8 at 70 percent on 3 to 10 micron particles, the dust, pollen and lint range. The everyday filter for warehouses, shops and general commercial space, and a solid pre filter. Shop MERV 8
- MERV 10/8A: Parker’s DP filter, rated MERV 10 under ASHRAE 52.2 and MERV 8 under the Appendix J test. Wire backed with high dust holding, built for rooftop units and air handlers. Shop MERV 10/8A
- MERV 13: per the EPA, catches at least 50 percent of 0.3 to 1 micron particles. For offices, schools and healthcare spaces where indoor air is part of the spec. Check that the fan can handle the extra resistance. Shop MERV 13
Order by the case for the whole route
Your size is printed on the frame of the filter you pull, like 20x25x4. Mix grades and sizes on one order in 1, 2 or 4 inch depths, and ship to your shop or straight to the building. Pay by card or PO. HVAC filter orders have a $650 minimum, and any mix of sizes and grades counts toward it. Shipping is free, and filters typically ship in 1 to 2 weeks.
Who these are not for
If you’re a homeowner replacing one filter, a local store will get you there faster. If your system calls for HEPA, or you’re filtering process dust on a dust collector, these aren’t the right filters. Book a free system review and we’ll help you find what fits.