Description
The dust never gets into the room because the bench is the hood. You work on it, and it pulls down and away from your face the entire time.
You are buying this for grinding, sanding, deburring and small parts finishing at a bench.
We are an authorized DustHog distributor and we sell this line every week. That means you get the right part number the first time rather than a catalog page and a phone number.
Configure it
Pick your build from the Configuration dropdown above. Every entry is a real factory part number, with horsepower, voltage and filter options already resolved, with the part number shown in brackets so you can check it against a drawing or a previous order. 4 configurations available on this model.
What you get
- A genuine DustHog unit, built to order at the factory
- Ships LTL freight. We quote the actual freight and confirm it with you before anything leaves the factory, so there is no surprise on the invoice
- The part number confirmed with the factory before we place it
- Replacement filters and spare parts listed on this site so you are not hunting them in two years
Downloads
Who this is not for
- Explosive dust or an explosive atmosphere. Parker’s V Series owner’s manual says do not use this unit in explosive atmospheres and do not collect emissions that are explosive. If your dust is combustible, call us before you order.
- Air that has to leave the building. The manual describes the V Series returning the cleaned air to your work area. If your process or permit requires exhausting outside, sort that out before you choose this unit.
- Pulse cleaning without shop air. The pulse cleaning configurations need a clean, dry 90 to 110 PSIG compressed air supply, per the manual. The manual also lists an option where you clean the filters by hand outside the cabinet. Ask us which configuration that is.
- Sparks with no spark protection. For metal grinding and other spark producing processes, the manual says care must be taken to reduce fire hazards. Plan for that before sparks can reach the cartridges.
Not sure which configuration fits your machine or your room? Get a free assessment and we will spec it with you before you spend a dollar.
Part numbers for this unit
Every configuration of this unit lives on this page. If you came in with a part number from a quote, a drawing, or an old nameplate, match it against the list below, then pick that configuration above.
VB-0750, VB-0750-C11XFN, VB-0750-C11XNN, VB-0750-C12XFN, VB-0750-C12XNN, VB-0750C11XFN, VB-0750C11XNN, VB-0750C12XFN, VB-0750C12XNN
Parts that fit this collector
Matched to the DustHog V-Series from the factory parts list. Click any part to go straight to it.
Filters and cells
- Carbon After Filter (33-1219)
- ProTura® Nanofiber (33-10097)
- ProTura® Nanofiber (33-10098)
- ProTura® Nanofiber Fire Retardant (FR) (33-10097-1)
- ProTura® Nanofiber Fire Retardant (FR) (33-10098-1)
- ProTura® Nanofiber Fire Retardant (FR) Wide Pleat (33-10097-15)
- ProTura® Nanofiber Fire Retardant (FR) Wide Pleat (33-10098-15)
- ProTura® Nanofiber Wide Pleat (33-10097-5)
- ProTura® Nanofiber Wide Pleat (33-10098-5)
Electrical
Mounting and hardware
Hoses and ducting
Ducting and connections
Match to the inlet collar size you configured on this unit.
6 in.
- 6 in. Clamps, EA (15-0004)
- 6 in. Flexhose, Per Foot (15-0107)
- 6 in. Inlet Collar, Flange (3261-0600)
- 6 in. Inlet Collar, Slip (03-10812)
- Elbow Brkt, Left, 6 in. SA, Insid (10-12688-1M)
- Elbow Brkt, Left, 6 in. SA, Outsi (10-12689-2M)
- Elbow Brkt, Right, 6 in. SA, Insi (10-12689-1M)
- Elbow Brkt, Right, 6 in. SA, Outs (10-12688-2M)
8 in.
- 8 in. Clamps, EA (15-0005)
- 8 in. Flexhose, Per Foot (15-0071)
- 8 in. Inlet Collar, Flange (3261-0800)
- 8 in. Inlet Collar, Slip (03-10813)
- Cap 8 in. Uncrimped (15-0024)
- Elbow Brkt, Left, 8 in. SA, Insid (10-12688-3M)
- Elbow Brkt, Left, 8 in. SA, Outsi (10-12689-4M)
- Elbow Brkt, Right, 8 in. SA, Insi (10-12689-3M)
- Elbow Brkt, Right, 8 in. SA, Outs (10-12688-4M)
- Flex DUCT-8 in. (15-0049)
