Replacement Cartridge Filter for Donaldson Torit P131912, 12.75 x 26 in. (1565783)

(602) 456-9661 Reorder 0 Maintenance Request Request an Assessment
dusthog dust collector cartridge filters

Replacement Cartridge Filter for Donaldson Torit P131912, 12.75 x 26 in. (1565783)

$107.00

Replacement cartridge filter 1565783, 12.75 x 26 in. Crosses to Donaldson Torit P131912 and 7 more part numbers.

Pay by card. On orders of $500 or more, choose Check or Purchase Order at checkout, give us your PO number, and we send your invoice, paid in full before shipment. Tax exempt? Email your certificate before you order: info@industrialcleanairproducts.com

Questions before you order? Call 602-456-9661Typically ships in 1 to 2 weeksFreight is $50 per filter, added at checkoutNeed it sooner? Email us for expedite timesSecure checkoutShipping policyReturn policy

Ordering filters or parts again? Reorder in one step

SKU: PKR-1565783
Category:

Not sure which MERV rating your system can handle? Read the short guide to MERV 8 vs. MERV 13

Description

This replacement cartridge filter crosses to the part numbers listed below. Check the size against your current filter before you order.

Replaces

  • Donaldson Torit: P131912, P030588, 8PP-19215-01
  • AAF: 1835271-052
  • Environmental: E04378
  • Fleetlife: FA-19215, FA-22022, FA-22343

Specifications

Part number 1565783
Type Dust collector cartridge filter
Height 26 in.
Outside diameter 12.75 in.
Inside diameter 8.375 in.
Media Cellulose and polyester blend (80/20)
Efficiency MERV 10 at 900 cfm, ASHRAE 52.2
Fractional efficiency E1 (0.3 to 1.0 micron) 23.6%, E2 (1.0 to 3.0 micron) 50.1%, E3 (3.0 to 10.0 micron) 88.9%
Filter media area 195 sq ft
Permeability 14 cfm/sq ft at 0.5 in. w.g.
Maximum temperature 180°F
Top end cap Electro Galvanized (22 ga), Open
Bottom end cap Electro Galvanized (22 ga), Closed, bolt hole 0.540 in.
Gasket 1/2 in. x 1/2 in. x 10.25 in. ID isoprene sponge applied on top cap
Inner retainer Electro galvanized expanded metal 3/8 in. x 5/8 in. (9.53 mm x 15.88 mm), 72% open area
Outer retainer Electro galvanized expanded metal 3/8 in. x 5/8 in. (9.53 mm x 15.88 mm), 72% open area
Source Manufacturer data sheet for item 1565783

Who this is not for

This is a replacement filter cross referenced to fit. It is not made by the manufacturers named above. If your part number is not on the list, send it to us and we confirm the fit before you order.

Not sure it matches? Look up your part number in the cross reference list or call 602-456-9661.

Additional information

Lead Time

1 to 2 weeks

Related products