Replacement Cartridge Filter for Plymovent 6815-1001, 12.75 x 12.875 x 29.5 in. (1566235)

(602) 456-9661 Reorder 0 Maintenance Request Request an Assessment
dusthog dust collector cartridge filters

Replacement Cartridge Filter for Plymovent 6815-1001, 12.75 x 12.875 x 29.5 in. (1566235)

$207.00

Replacement cartridge filter 1566235, 12.75 x 12.875 x 29.5 in. Crosses to Plymovent 6815-1001. Also searched as: 68151001.

Pay by card. On orders of $500 or more, choose Check or Purchase Order at checkout, give us your PO number, and we send your invoice, paid in full before shipment. Tax exempt? Email your certificate before you order: info@industrialcleanairproducts.com

Questions before you order? Call 602-456-9661Typically ships in 1 to 2 weeksFreight is $50 per filter, added at checkoutNeed it sooner? Email us for expedite timesSecure checkoutShipping policyReturn policy

Ordering filters or parts again? Reorder in one step

SKU: PKR-1566235
Category:

Not sure which MERV rating your system can handle? Read the short guide to MERV 8 vs. MERV 13

Description

This replacement cartridge filter crosses to the part numbers listed below. Check the size against your current filter before you order.

Replaces

  • Plymovent: 6815-1001

Specifications

Part number 1566235
Type Dust collector cartridge filter
Height 29.5 in.
Outside diameter 12.75 in.
Inside diameter 8.5 in.
Media Spunbond polyester
Efficiency MERV 11 at 900 cfm, ASHRAE 52.2
Fractional efficiency E1 (0.3 to 1.0 micron) 49.1%, E2 (1.0 to 3.0 micron) 73.1%, E3 (3.0 to 10.0 micron) 97.2%
Filter media area 154 sq ft
Permeability 14 cfm/sq ft at 0.5 in. w.g.
Maximum temperature 180°F
Top end cap Electro Galvanized (22 ga), Open
Bottom end cap Electro Galvanized (22 ga), Closed, bolt hole 0.540 in.
Gasket 1/2 in. x 1/2 in. x 10.25 in. ID isoprene sponge applied on top cap
Inner retainer Electro galvanized expanded metal 3/8 in. x 5/8 in. (9.53 mm x 15.88 mm), 72% open area
Outer retainer Two (2) Woven Bands
Source Manufacturer data sheet for item 1566235

Who this is not for

This is a replacement filter cross referenced to fit. It is not made by the manufacturers named above. If your part number is not on the list, send it to us and we confirm the fit before you order.

Not sure it matches? Look up your part number in the cross reference list or call 602-456-9661.

Additional information

Lead Time

1 to 2 weeks

Related products