Description
The SHN is an electrostatic precipitator, so the collection cells wash instead of getting thrown away. No media to reorder, no bag to change, no consumable line item every quarter.
You are buying this for oil mist, coolant smoke and machining fume where you would rather wash a cell than buy filters forever.
We are an authorized SmogHog distributor and we sell this line every week. That means you get the right part number the first time rather than a catalog page and a phone number.
Sized with your order
Your pulley drive set and your drain loops or bottles are matched to your airflow and static pressure rather than fixed into the part number. Your inlet collar is included. Give us your airflow and static pressure when you order and the rest ships with the machine.
Your inlet collar IS included on the SHN, sized by model: 12 in. on SHN-11 builds, 14 in. on SHN-12, 18 in. on SHN-22. The factory allows no deviation there.
Configure it
Pick your build from the Configuration dropdown above. Every entry is a real factory part number, with horsepower, voltage and filter options already resolved, with the part number shown in brackets so you can check it against a drawing or a previous order. 35 configurations available on this model.
What you get
- A genuine SmogHog unit, built to order at the factory
- Ships LTL freight. We quote the actual freight and confirm it with you before anything leaves the factory, so there is no surprise on the invoice
- The part number confirmed with the factory before we place it
- Replacement filters and spare parts listed on this site so you are not hunting them in two years
| Filter,Coalescing Oil Mist SHN
33-10049-0001
|
$744 | Add to cart |
See all filters for these collectors →
Need a part we don’t list? Send your model and serial and we’ll confirm the right number before you order.
Who this is not for
- A hot air stream. Parker’s SHN owner’s manual says the air stream temperature should not exceed 120°F (49°C).
- Explosive emissions, combustible vapors or gases. The manual says do not use it in explosive atmospheres, do not collect emissions that are explosive, and do not operate it in the presence of combustible vapors or gases.
- A unit nobody will clean. The manual says to inspect the unit frequently and remove contaminants to prevent excessive accumulation, which may result in flash-over or fire damage. If no one on your crew will own that routine, this is not the right unit.
- Chain hanging the big units. Per the manual, the SHN-40 and SHN-50 may be suspended by rods but are not approved for chain hanging.
Source: Parker SHN owner’s manual.
Not sure which configuration fits your machine or your room? Get a free assessment and we will spec it with you before you spend a dollar.
Parts that fit this collector
Matched to the SmogHog SHN from the factory parts list. Click any part to go straight to it.
Filters and cells
- Filter, Coalescing Oil Mist SHN (33-10049-0001)
- Assembly, Filter, Knitted Mesh, 36 in.X1 (33-10071-0002)
- Assembly, Filter, Knitted MESH18 in.X18 (33-10071-0001)
- Assembly, Spare Ionizer (9W, 10M, L) (02-0037-S)
- Collection Cell Gpn (spare) (02-2339-S)
- Filter, Aluminum Mesh, 18 in.X18-3 (33-10072-0001)
- Filter, Aluminum Mesh, 36 in.X18-3 (33-10072-0002)
Drains
Motors and drives
- Blower-belt DR 1 in. Sgl 15-15 1 (32-0063)
- Blower-belt DR 3/4 in. Dbl 9-7 (32-0036)
- Blower-belt DR 3/4 in. Sgl 9-7 @ (32-0059)
- Motor 1 HP, 575/3/60 (22-0047)
Electrical
- Power Supply, Industrial (-) 120V (21-1216D)
- Power Supply, Industrial (-) 120V (21-1220)
- Transformer, 100VA, 208:115V (21-1275-100)
- Transformer, 100VA, 460/230:115V (21-1274-100)
- Transformer, 100VA, 575:115V (21-1276-100)
- Transformer, 150VA, 208:115V (21-1275-150)
- Transformer, 150VA, 460/230:115V (21-1274-150)
- Transformer, 150VA, 575:115V (21-1276-150)
- Transformer, 350VA, 460/230:115V (21-1274-350)
