Description
Genuine DustHog / SmogHog part 1212709. The factory describes it as Polyester Spunbond Teflon Membrane (T).
Running a DustHog or SmogHog unit means the consumables are the real cost of ownership, not the machine. A filter left in past its life pulls your airflow down quietly, and the motor works harder the whole time it is happening. Changing on a schedule costs less than changing when somebody complains about the smell.
Fits
DustHog and SmogHog equipment. Send us your nameplate and we will confirm the model before you order.
Specifications
| Part number | 1212709 |
| Filter | Polyester Spunbond Teflon Membrane (T) |
| Media | Spun bond polyester with ePTFE membrane |
| Efficiency | MERV 16 at 900 cfm, per ASHRAE 52.2 |
| Height | 26 in. |
| Outside diameter | 12.75 in. |
| Inside diameter | 8.375 in. |
| Filter media area | 106 sq ft |
| Maximum temperature | 180 F (82 C) |
| Top end cap | Open, electro galvanized steel, 22 gauge |
| Bottom end cap | Closed, 0.54 in. bolt hole, electro galvanized steel, 22 gauge |
| Gasket | 1/2 x 1/2 x 10.25 in. ID isoprene sponge, on the top cap |
| Inner retainer | Electro galvanized expanded metal, 72% open area |
| Outer retainer | Two woven bands |
| Permeability | 7 cfm per sq ft at 0.5 in. w.g. |
| Source | Manufacturer filter cartridge data sheet for item 1212709 |
Who this is not for
This is a genuine DustHog / SmogHog part for DustHog and SmogHog equipment. It will not fit another manufacturer’s collector. If you are not sure what is in your unit, send us the nameplate and we will read the model for you.
Ordering the same parts every quarter? Ask us about FilterGuard and we will put them on a schedule so you stop reordering by memory.
