Description
Every Quick-Fit pipe is 5 ft long, so your runs rarely land on an even 5. Cut the pipe to length and the sleeve slides over it to close the gap. You will usually also want one at each branch and 90.
What you get
- About 11 in. long, laser-welded seam
- Standard gauge is 22ga for 3 in. to 12 in. and 20ga for 13 in. to 24 in.
- Black nitrile O-ring included
- Formerly called the Adjustable Nipple
- Galvanized is ASTM A653 G90 steel with a recommended max service temperature of 390°F. 304 stainless meets ASTM A240 and is rated to 1100°F.
Before you order
- Quick-Fit clamps are sold separately. Plan on one clamp per component in your order.
- Silicone (red) O-rings for higher temperatures are sold separately.
- Made in the USA by Nordfab in Thomasville, NC. Nordfab is ISO 9001:2015 and ISO 14001:2015 certified.
When this is not the right part for you
- Do not use a standard sleeve on 16ga or 14ga pipe. Use the Quick-Fit Sleeve Assembly instead.
- Planning a whole system rather than a few parts? Book a free assessment and talk to us about a custom system.
Specifications from the Nordfab Ducting Product Reference 2026.
